IPKBCASE A11/P11/A13/P13

IPKBCASE A11/P11/A13/P13

This article will consist of iPKBCASEA11, P11, A13, and P13

Quick Q & A:

 

Q: Can the keyboard be used without the hard cover?

A: Yes, the keyboard will still function normally with or without the hard case/stand. 

 

Q: How long will my battery last after being fully charged?

A: Depending on usage and whether the backlight is used often, this will vary on how long you can go before your next charge. But, for example, let's say you only use the keyboard a few hours a week, with no backlight, you can go approximately 3 months. 

 

Q: How long does it take to charge?

A: Depending on how it is charged (via USB port or wall adapter), it takes approximately 2-3 hours to fully charge.

 

Q: Is there a way to disable the track pad?

A: Yes, if you press Fn and Caps Lock keys together, then let go. 

 

Setting up your keyboard

  1. Turn your keyboard on by pressing and holding the power button for 3-4 seconds (you will see a green light come on and then turn off)
  2. Go to Settings > Bluetooth (leave this screen open)
  3. Press and hold the Fn + 1 key simultaneously until you see a blinking blue LED light in the upper right corner
  4. The keyboard should come up in your 'Nearby Devices' section under IPKBCASE, press 'Pair' or 'Connect'
  5. Once connected, use your track pad to move around, click and attempt a test type. 

 

Charging your keyboard

  • You can charge your keyboard via a USB port or a wall adapter. 
  • You will see a red light while it is charging, then it will turn off when charged. 

 

Adjusting the backlight

Press Fn + X to turn the backlight on/off and increase/decrease the brightness. 

 

Keyboard isn't working

The issue you are encountering may be caused due to a loss of connection or a channel failure.
  1. On your iPad, go to Settings > Bluetooth (leave this screen open) 
  2. On keyboard, press and hold power button for 3 seconds (until you see the green light come on and then turn off)
  3. Press Fn and 1 at the same time, let go
  4. IPKBCASE should pop up on your nearby device list > hit connect

Note: If the keyboard is listed in your device list and will not connect when tapped, you will need to Remove/Forget the device and then proceed to Step 2.

    • Related Articles

    • IPKBCASE 11/M7

      Getting started with your Bluetooth keyboard case Quick Q & A: Q: Can the keyboard be used without the hard cover? A: Yes, the keyboard will still function normally with or without the hard case/stand. Q: How long will my battery last after being ...

    • BTMINIZKEYA/SG

      This article will help you set up, troubleshoot and answer common questions. Quick Q&A: Q: How do I know when the battery is low? A: You will get a flashing red LED light under B1. Q: How long does it take to fully charge? A: 3-5 hours. Q: How do I ...

    • Bluetooth keyboard will not work

      The issue you are encountering may be due to a loss of connection or a channel failure. We can test this by re-syncing or changing channels to see if there is any difference in the way the keyboard responds. First, locate your Bluetooth keyboard ...

    • BTTABKEYBAT series

      This article will include answers to general questions and troubleshooting steps. ->BTTABKEYBAT USER MANUAL<- Q: What types of devices can this keyboard be connected to? A: You can connect this keyboard to an iPad, tablet, cell phone, desk top, ...

    • BTWKEYMB

      This article will include answers to general questions as well as troubleshooting. Q & A: Q: How do I know when the keyboard needs to be charged? A: You will get a flashing red LED in the upper right corner. Q: How do I know when the keyboard is ...