BTKEY2ZCB

BTKEY2ZCB

This information is for both the Aluminum and Space grey version.

Setting up your keyboard

1. Turn the keyboard on (you should see 3 LED lights come on and then turn off.
2. Go to System Preference/Settings then click on Bluetooth (leave this screen open).
3. Hold the B1 button on the top right of the keyboard for 2-3 seconds.
4. The B1 LED will rapidly blink.
5. Use your mouse to click/press 'Connect' when the keyboard is found under 'Nearby devices' (it may pop up as BTKEY2 or keyboard).
 

For Apple users only - Keyboard set-up assistant 

Once you have successfully connected your keyboard to your Mac, you may get a pop-up that states you  need to identify your keyboard (Keyboard Set up Assistant). Here are the steps:

  1. Click on continue
  2. Press and release the 'Z' key
  3. Press and release the '/?' key 
  4. Choose 'ANSI' as your region
  5. Click 'Done'
Note: There are two instances when this pop up may not come up - The first being the connection was unsuccessful. You can check if this is the case by doing a quick test type in any application you'd like (i.e. Google, Safari, Notes), if you are not able to type, you may want to go through the sync instructions again. The second reason the pop up may not appear consistently is because it only triggers when a new, unknown USB or Bluetooth keyboard is detected, or if the system fails to recognize an existing one due to connectivity glitches. You can always manually do it by:
Settings > Keyboards > Change keyboard type  - (go through process listed above)


Setting up your mouse

  1. Turn the mouse on
  2. Go to Settings > Bluetooth 
  3. Press the BT button briefly to select B1, then you will get a rapid blinking LED
  4. The mouse should pop up under Nearby devices, press 'Connect'

 

 

 

 

 

Is your keyboard not working?

  • Make sure that the keyboard is turned on (the on/off switch is located on the back sticker).
  • Make sure it is fully charged (you will get a red light while it is charging and a green light when it is fully charged).
  • Please note: The charging cable does not convert the keyboard into a wired keyboard.
If your keyboard will not work with your computer, we first recommend you try pressing and releasing the channel you are currently using. I.e. if you are using this keyboard on one device, press and release B1 key in the upper right corner, if you get a bold light, do a test type. If you do not get a bold light, you will need to re-sync your device.
 

Changing the Channel - This would only apply to you if you have multiple devices connected to this keyboard

  • Press B1 one time; Do not hold it. (Holding the B1 button will make it lose connection. If it happens, the keyboard will need resyncing.
  • Press B2 one time; Do not hold it. (Holding the B2 button will make it lose connection. If it happens, the keyboard will need resyncing.
  • Press B3 one time; Do not hold it. (Holding the B3 button will make it lose connection. If it happens, the keyboard will need resyncing.
 

Battery life

  • Approximately 3-5 months

    • Related Articles

    • Bluetooth keyboard will not work

      The issue you are encountering may be due to a loss of connection or a channel failure. We can test this by re-syncing or changing channels to see if there is any difference in the way the keyboard responds. First, locate your Bluetooth keyboard ...

    • BTDYNAMOUSE series

      This article will consist of commonly asked questions, troubleshooting and assisting in setting up your mouse. Quick Q& A: Q: Why does the description say battery operated and rechargeable? A: We recently updated this mouse. V1 was battery operated ...

    • BTUCACPKEYCB

      Getting to know your keyboard, includes troubleshooting. Quick Q & A: Q: Do I have to use the mouse with the keyboard? A: No you do not. The keyboard can be used individually. Q: Is the mouse dual mode? A: Unfortunately, it is not. The keyboard is ...

    • BTTABKEYBAT series

      This article will include answers to general questions and troubleshooting steps. ->BTTABKEYBAT USER MANUAL<- Q: What types of devices can this keyboard be connected to? A: You can connect this keyboard to an iPad, tablet, cell phone, desk top, ...

    • Troubleshooting your Dual-mode keyboard

      My keyboard will not work If your keyboard does not work, here are some steps you can take: Make sure the switch is in the correct position and not in the middle of either option. If in wired mode, ensure the wires are pushed in all the way on both ...